Using your Ultimate Timers
Your Ultimate Timers are a 40 Lap Memory Stopwatch, with the
functionality to be able to review the 40 laps saved in the memory.
Timing an Event
Press the start/stop button to begin timing an event. Press the start/stop
button a second time to stop timing.
Recording a lap time to memory
Whilst an event is being timed, pressing the lap/reset button will place
the elapsed time into the Ultimate Timer’s memory, timing will continue,
and the elapsed time will appear in the top right hand corner of the
display.
During timing the lap/reset button can be pressed up to 40 times,
allowing 40 different times to be recorded to the Ultimate Timer’s
memory.
Reviewing a lap in memory
Laps saved to memory can be viewed at any point, either during timing or
when timing has stopped.
Press the ‘up’ or ‘down’ buttons to cycle through the saved laps.
Resetting
With timing stopped, pressing the lap/reset button will reset the
stopwatch only. The Lap times will be unaffected.
To reset the lap times in memory press and hold the ‘Clear’ button using a
paperclip.
Low Power Mode
In low power mode the LCD screen is turned off to extend the life of the
battery. Pressing any button will wake up the Ultimate Timer and all
stored lap times will be retained.
Ultimate Timer guide_Layout 1 04/12/2012 18:57 Page 5
