Giant Illuminated
Board
Using Your Product
To switch the Board on, press the power symbol.
When first switched on the board will light red. Each half of the board can operate
independently. To operate each half press the > < buttons to cycle through the colours.
When the colour red is reached again it will automatically cycle through the colours in
sequence. Pressing the button again whilst in automatic sequence mode will turn the
writing board off into standby mode.
Always switch off using the on/off switch to preserve the battery life.
International Power supply
The Light Panel is supplied with a multi-region power supply which is supplied with the
UK plug fitted. This can easily be changed to suit any country. Press the release button to
release the UK plug and replace it with the required plug module. Ensure that it “clicks” in
place securely.
The toy must only be used with the recommended transformer.
Recharging the product
NB: The Giant Illuminated Board will not work whilst charging.
¥ Insert the adaptor cable into the charging socket at the side of the board.
¥ Plug the adaptor into a wall socket.
¥ The product may take up to 4 hours to fully charge, this is if the battery has been fully
discharged.
¥ The led on the product will flash red to show that the batteries are low and the product
needs charging.
¥ The LED on the product will show a solid red light when charging.
¥ The LED on the product will show a solid Green light when fully charged.
¥ Only charge the product using the charging adaptor provided.
¥ Once fully charged the product will have life for approximately 6 - 8 hours.
