also ok
1. loosen ground connector
2. slide-in ground wire from turntable
3. firmly tighten
How To Connect Groundwire
Step By Step
01. Plug in your turntable to input.
02. Connect ground wire from turntable to ground input.
03. Connect your audio system to output.
04. Connect power supply.
05. Turn on power switch.
Troubleshooting
Hum or buzz from your speakers?
- Make sure your ground wire is properly connected.
- Un-plug + re-plug all cables.
- Raise volume on your audio system while lowering volume on PH01.
- Check your power source by plugging directly into a wall rather than a power strip or try a different outlet.
- Move any electronics that may interfere away from your setup.
Headphone not loud enough, no bass?
Do your headphones have an inline control / button control (check the headphone plug, does it have 3 black
rings?). You will need a special 1/4” adaptor.
Questions? Email [email protected]
page 2 of 2
