16
•
Unscrew handle screw underneath the handle.
Align the new handle with the bracket fitted with the
body, insert screw and fasten tightly.
ii) To remove the lid handle:
•
Remove the gasket and the pressure regulator.
•
Unscrew the vent tube nut and remove the vent
tube. The hold down cup will come away along with
the vent tube and the stainless steel washer.
•
Unscrew the lid handle screws from inside the lid.
•
Make sure, the square nuts in the lid handle do
not fall while removing the handle. The VPI also will
come off.
Now to fix the new handle:
•
Align the handle to the lid with the square nuts in
place and also the VPI in it’s position inside the lid
handle. Tighten the screws firmly from inside the lid.
•
Place the hold down cup in position and place the
stainless steel washer inside the cup. Now refix the
vent tube from inside the cup onto the lid and tighten
the vent tube nut firmly from inside the lid.
iii) To remove the back handle:
•
Unscrew the handle screw and take out the handle
from the bracket. Align the new handle with the
bracket, insert the screw and fasten tightly.