To use the stored channel
* Press the
“MEM”
button, then you will be able to see the stored channel
and
MEM
icon on the LCD.
* While the memorized channel is working, the keypad is locked. To
unlock the keypad, press the
MEM
button one more time. The radio goes
to the home channel and the keypad is unlocked.
9) Out Of Range Alert
* Icon blinks as the receiving signal gets weaker. The icon stops blinking when
the receiving signal comes back to normal status.
10) Transmitting
* Press and hold the PTT button (The “TX” LED will light red.)
* Speak slowly and clearly
* To Stop the transmission, release the PTT button.
* If there are no more receiving signal for 5 seconds, the unit will go into power
save mode.
11) Receiving
The coding feature reduces the possibility of interference and provides
enhanced communication. You can only listen to a call that has correct
matching code. When a signal is received, the received signal strength indicator
works and the LED lights green, in case that the channel has no CTCSS tone
code. However the LED lights amber if the channel has a CTCSS tone code.
Important :
Before transmitting or receiving to the other parties
* Correct channel is selected (1 to 8) and
* Correct code is set ( 00 to 38 )
12) Channel Scanning
* This feature allows you to monitor all activated channels while scanning.
To activate the Scan
* Press the
SCAN
button
* Radio will begin scanning.
* When in scan mode, the display will show each scanning channel.
* After an activated channel is scanned, the scan stops to receive the signal.
If there is no more signal, the scan will resume automatically.
To disable the Scan
* Press the
SCAN
button, and the unit will stop the scanning.
*
SCAN
icon indicator will disappear from the LED.
* The unit will return to home channel.
10
