FTE-7000A User's Guide Rev A 5/2014
32
Chapter 8 Project Management
Modify Properties
To modify the properties, have the project to modi
fi
ed highlighted. Press menu, highlight edit/properties
and press select. The project properties will be displayed, use the up/down buttons to highlight the
fi
eld to
be changed, use the onboard QWERTY keyboard to make the change and touch save. Continue with the
changes needed, when compete highlight close and press select.
Use the left and right buttons to highlight edit tab and press select or the down button to open the drop-down
menu. Use the down button to highlight properties and press select. The properties list will be display, use the
up or down buttons to highlight the property to be modi
fi
ed and press select. The QWERTY keyboard will be
displayed with the property information. Press save when done with the change. Continue with the changes
needed, when compete highlight close and press select.
Temporary Modification of Parameters
Test parameters may be temporarily changed by selecting new settings, such as wavelength, average time,
pulse width, and range directly on the main OTDR screen with the touch screen capabilities or open the
parameter settings screen, set the new parameter and save. All subsequent test will use the new settings until
the original settings are returned or the folder is reopened resetting the project parameters. To make temporary
changes to event sensitivity or thresholds, open the parameters settings page.
Exit Project Management
To exit the project management, press menu, use the left or right buttons to highlight the
fi
le tab, press select
or the down button to open the drop down menu. Use the down button to highlight Exit and press select.
Rename a Project
To rename a project, have the project to be renamed highlighted, press menu, to open the project management
menu. Use the left and right buttons to highlight edit tab and press select or the down button to open the drop-
down menu. Use the down button to highlight rename and press select. The project name will be displayed
with the onboard QWERTY keyboard. Use the keyboard to rename the project and touch save.
