PD-20001-R1
Stagetracker II User Manual
42
10.9
TTA FX output module
This tab sets the parameters for the TTA FX from TTA.
10.9.1
Basic parameters
Parameter
Default value
Description
IP address
127.0.0.1
The IP address of the TTA FX
Sampling rate (Hz)
20.0
The sampling rate of tracking data sent to the TTA FX
10.9.2
Geometrical transformation
Centre:
Parameter
Default value
Description
Centre X
0.0
The offset measured in meter to define X
Centre Y
0.0
The offset measured in meter to define Y
Centre Z
0.0
The offset measured in meter to define Z
Scale and limit:
Parameter
Default value
Description
Lowest X
-5.0
Limits the X coordinates of the positions in the Stagetracker
coordinate system
Highest X
5.0
Output min X
-5.0
Corresponding limits for the TTA FX X coordinate
Output max X
5.0
Lowest Y
-5.0
Limits the Y coordinates of the positions in the Stagetracker
coordinate system
Highest Y
5.0
Output min Y
-5.0
Corresponding limits for the TTA FX Y coordinate
Output max Y
5.0
The input to the TTA FX module is limited to the boundaries given by the stage and active area setup
–
whichever is
smallest. In addition, one can limit the output further, by imposin
g smaller limits in the parameters “Lowest
X
”, “Highest
X
”,
“Lowest
Y
” and “Highest
Y
”.
10.9.3
Filter parameters
The TTA FX module also contains a set of filter parameters.
These parameters shall not be changed from their default values unless after consulting TTA.
