Copyright © 2017 TTAAll Rights Reserved.
Appendix Implication of indicator light
30
1) Start to calibrate:connect copter with GCS,click
RC CHANNEL
,move the stick to
maximum and minimum position 4 to 5 times.
2) Stop calibration:click Finish after calibration. Then channel status could be
checked.
3) Normal or reverse setting of remote controller is set to check whether it’s right or
wrong.
5.2.2 IMU calibration
Leave the copter in a horizontal position,click the button
ACCELEROMETER
,LED will
flash in red,green,yellow alternately,LED
green
means successful calibration,data will be
stored by restart.
Summary of Contents for M8A pro
Page 27: ...Copyright 2017 TTAAll Rights Reserved Appendix Implication of indicator light 26 ...
Page 28: ...Copyright 2017 TTAAll Rights Reserved Appendix Implication of indicator light 27 ...
Page 43: ...Copyright 2017 TTAAll Rights Reserved Appendix Implication of indicator light 42 ...
Page 44: ...Copyright 2017 TTAAll Rights Reserved Appendix Implication of indicator light 43 ...