Display Settings
Time Settings
1. Under “OFF” status with connection to wall power, the
backlit LCD displays clock and alarm status in
brightest level for 5 seconds.
1. W hen the unit is on, press and hold “ALARM
ON” for 6 seconds to enter time setting.
2. Press <<MODE>> to turn on the unit, the backlit LCD
begins to display not only clock, alarm status, also the
icon letter “iPod”.
2. Enter clock setting, the “AM” begins to flash, and
press <<
>> to choose between “AM” / “PM”/ 24-
hour mode, then press <<SET>> to confirm. In 24-
hour mode, the clock area begins to flash while “AM”
and “PM” disappear.
3. There are 6 brightness level of the backlit LCD. Press
<<SNOOZE>> to adjust the brightness under “ON”
status.
3. Once confirmed 12 or 24 hours mode, the HOUR
figure in the clock area begins to flash. Press <<+>>
or <<->> to adjust the HOUR, then press <<ALARM
ON>> to confirm; then the MINUTE figure begins to
flash and
press <<+>> or <<->> to adjust the MINUTE.
- 16 -
4. To exit clock setting, press <<SET>> to confirm you
setting.
- 17 -
Summary of Contents for B7
Page 1: ......
