Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
38
6.1 Function Description
Channel
Top
Middle
Bottom
E: Flying mode
Attitude mode
GPS mode
AB mode
F: AB recording
/
Recording Point A
Recording Point B
Y3: Flow rate
Higher
/
Lower
D: Home landing
OFF
/
ON
Channel
Left
Middle
Right
G: Pump mode
OFF
Combination
Manual
H: Terrain following
ON
/
OFF
6.2 Bind
Power on the remote controller first. Power on drone for 1 second and cut off
immediately, repeating this step for three times. Then power on the drone for the
fourth time and keep the power connection. The done will enter into binding mode
automatically. Drone will bind the remote controller successfully with a voice
prompt.
Remote controller need to be calibrated after binding.
Remark: Binding remote controller can not be operated for more than one pair at the
same time. Only one-to-one pairing is allowed.
6.3 RC connection & Device Helper.APP Introduction
1).Turn on remoter controller ( short-press + long-press ). Open bluetooth, search and
connect bluetooth of remote controller ( T12-*** , password: 1234).
2).Device Helper introduction.
ADJUST PARAMETERS -------- Adjusting channels, rudder value, fail-safe value.
OTHER OPTIONS --------- Selecting SBUS or PPM output mode of receiver, and
telemetry baud rate.
HAND SETTINGS -------- Select hand mode, USA, Japan ect.
UPDATE DEVICE -------- Update firmware online
Connection mode --------- Bluetooth mode, SBUS receiver mode.
Cautions: Don’t do any adjustment, unless under professional introduction. Otherwise,any
consequences caused are undertaken by its users.
