Beijing TT Aviation Technology Co., Ltd.
Add: No.1 TTA Building, Niantou Industrial Park ,Changping District,Beijing, China
www.ttaviation.com
9
1) Connect arm MT60 female connector and main part MT60 male connector
2) Align 6mm inner bore of arm pipe clamp and 6mm hole of copter main part.
3) M5*49 shutter screw should be plugged into hexagon part of pipe clamp 6mm hole in
main part.
4) M5 nut should be tightened from the other side,see figure 2-2.
5) The other three arm should be installed as this method,see figure 2-3.