Tsubaki ECHT-FLEX NEF130W, Manual

Page: 47 / 47

46
Safety Instructions
Note : Failure take heed of information labeled “CAUTION” may also lead to serious accidents depending on the situation.
WARNING
CAUTION
Death or serious injury may result from misusing the product without following the directions given
under this sign.
Minor or moderate injury, as well as damage to the product may result from misusing the product without
following the directions given under this sign.
(General)
●
Install a safety cover and prevent access to any rotating parts: otherwise injury may occur. Set a safety mechanism to stop the
rotating parts when the cover is lifted.
●
Transporting, installing, operating, maintaining or inspecting must be carried out by skilled and professional engineers to avoid
mis-handling and hazardous situations.
●
W hen coupling is used with vehicles that carry human, use a device to protect the vehicle: otherwise, accidents and damage
may occur.
●
W
hen the coupling is used for an elevator, install a safety device on the elevator in order to prevent it from falling, which can
cause damage and accidents resulting in death or injury.
(Unpacking upon delivery)
●
I f delivered in a wooden case, unpack with care. Sharp nails may cause injury.
(Additional machining)
●
N
ever modify the coupling; the quality or function of the product may decrease and break or damage the machine or injure the
operator.
(Transportation)
●
N
ever step under the product when it is being elevated for transportation: otherwise, either the poduct or load may fall, causing
accidents resulting in death or injury.
(Installation)
●
W ear appropriate clothing and safety gear (safety goggles, gloves, shoes, etc.).
●
M
ake sure the power is switched off, and the machine is completely stopped before installing. Take caution so that the power
does not reconnect accidentally.
●
M ake sure to tighten and apply sufficient amount of anti-loosening agent to the hexagonal socket head cap screws.
(Operation)
●
A
void contact with any rotating parts ( coupling, shaft, etc. ) during operations. Rotating parts can catch approaching objects
and cause serious injuries.
(Maintenance and inspection)
●
A void contact with any rotating parts ( coupling, shaft, etc. ) during maintenance and inspection. Rotating parts can catch
approaching objects and cause serious injuries.
●
M
ake sure the power is switched off, and the machine is completely stopped before carrying out maintenance and inspection.
Take caution so that the power does not reconnect accidentally.
Make sure the driving and driven equipment are also completely stopped.
WARNING
(General)
●
D
o not use coupling beyond its capacity as specified in the drawing. Exceeding its capacity can break the machine and cause
injuries.
●
D o not use damaged couplings. They can break your equipment and cause injuries.
(Transportation)
●
P
ay extra attention so that the equipment will not fall or rollover during transportations.
(Installation)
●
D o not touch the edge and inner diameter of any part with bare hands to avoid possible injury.
●
M
ake sure to align the drive and driven shafts as instructed in the manual when installing the coupling.
(Operation)
●
D o not touch the coupling during operations to avoid injuries.
●
I mmediately stop the machine upon any sign of abnormal operation.
(Maintenance and inspection)
●
W
ear appropriate clothing and safety gear (safety goggles, gloves, shoes, etc.).
●
C lean the surrounding area and maintain a clutter-free space to avoid secondary accidents.
●
C omply with Ordinance on Labor Safety and Hygiene 2-1-1 general standards.
●
C
onduct periodic inspections to make sure that the drive and driven shafts are aligned as described in the manual, and that the
rubber and plastic parts are not worn or deformed.
(Environment)
●
C oupling scraps should be disposed as general waste by skilled professionals.
●
T
his coupling meets RoHS (Restriction of Certain Hazardous Substances) standards and contains no hazardous chemicals.
CAUTION