Tsubaki Cableveyor TKP68H46 User Manual Download Page 1

Page: 1 / 4

Tsubaki

Cableveyor

ᴾ ᴾ ᴾ

1. Cableveyor Assembly

1-1.

Connect any disconnected links and attach the
arms to the hinge side of the link

Caution: Once the disconnected links are connected

and the Cableveyor is installed, determine
which direction the arms will open the easiest
before attaching.

1-2.

Fix the locking hook.

Push in the arms from above by hand. Hold the
entire arm down and lightly tap in the locking
hook head from the side with a plastic hammer.

2. Cableveyor Disassembly

2-1. Release the locking hook

Release the locking hook using a screwdriver and
remove the arm from the link.

Caution: Insert the screwdriver tip and release the locking hook as shown in the following diagram. Facing the

screwdriver in a different direction or forcefully inserting it may result in Cableveyor breakage.

Use a screwdriver with a 4.5mm or
smaller tip.

TKP68H46

(formerly TKP0680)

User Manual

Link

Arm

Locking
hook

Caution: Always wear the appropriate protective gear (safety glasses, gloves, safety shoes,
etc.) when working.

Summary of Contents for Cableveyor TKP68H46

Page 1: ...ng hook head from the side with a plastic hammer 2 Cableveyor Disassembly 2 1 Release the locking hook Release the locking hook using a screwdriver and remove the arm from the link Caution Insert the...

Page 2: ...iver and getting caught in the end area 2 2 Remove the arm Even with the locking hook removed the projections located on the ends of both sides of the arms will still be fixed into the locking grooves...

Page 3: ...ar mark on the bracket will align in the same direction The arm shape in the opposite direction differs and the arm will not insert With both left and right sides properly inserted into the grooves pu...

Page 4: ...ear properties 6 Avoid using wire plate jackets as they damage easily 7 Cables hoses wear easily when used stacked onto of one another Lay horizontally or use horizontal dividers 8 Set cables and hose...