TST-770 WSD Full Line Manual-RevA
© 2021 Truck System Technologies and Pressure Systems International Inc. All Rights Reserved Worldwide.
(770) 889-9102 M-F 9-8pm, Sat 9-2pm EST
Page 9
UNDERSTANDING YOUR TIRE ALERTS (cont.)
Sensor Low Battery Alert
Example:
Sensor Low Battery icon shown.
1.
Tire position will start flashing red.
2. Sensor Low Battery indicator and icon will
flash, once every second.
3. Audible alert will sound.
Fast Leak Alert
Example:
Loss of 2 PSI or greater in less than
one minute.
1.
Tire position will start flashing red.
2.
FAST LEAK indicator and icon will flash,
once every second.
3. Audible alert will sound.
Alerts Multiple Tire Positions
1. When there is more than one alert at the same
time, display will cycle through the multiple alerts.
2. Touch screen to silence audible alert. Display
will resume cycling through all programmed
tire positions. You can manually select any
programmed tire position by touching that
tire position.
OTHER FUNCTIONS
Normal Display Scrolling
The tire icons will automatically scroll through. Each tire position will be displayed for
approximately 5 seconds. You can manually cycle through the displayed tires by touching
the tire icon on the screen.
Back-lighting and Motion Detection
The display is equipped with a light sensor and a motion sensor. The back-light will turn
on when the vehicle is in motion and there is a little ambient light. If the vehicle has been
motionless for a while and the display is on the internal battery, the display will “go to
sleep” until the vehicle resumes motion.
Display Sleep Mode
When the display detects no motion for 10 minutes, it will enter into sleep mode
automatically, the screen turns off until motion is detected.
Display Auto-hide
If the display does not receive data from paired sensors, power unit or trailer for 15
consecutive minutes, the display will automatically “hide” those sensors. Sensors will
appear when they are in range.
Back To
