14
TREADREADER
TM
HANDHELD •
PRODUCT MANUAL
4.1.2.1 Switch from network mode to direct mode (factory reset).
6
6
connects to the selected network (top and bottom blue LED’s).
7. Follow instructions on screen, then press RETURN.
8. Hold the Wi-Fi button and press DISCOVERY, only release the Wi-Fi
button when the HandHeld buzzes. Wait for the HandHeld to restart.
9. Press CONNECT.
10. The HandHeld is now in network mode and will return to the license
plate entry screen.
To perform a factory reset of the HandHeld:
1. Switch the scanner on and wait for 15 seconds.
2. Hold the POWER and WI-FI BUTTONS until the HandHeld scanner
lights up all of the right-side LED’s and gives a long continuous buzz. It is
important to stop pressing the button as soon as the buzz starts.
3. Follow connect in direct mode (chapter 3.1.1).
NOTE: To change the HandHeld to DIRECT MODE again, please see the
section 4.1.2.1 below.
7
7
8
8
10
10
Summary of Contents for TREADREADER
Page 1: ...TREADREADERTM HANDHELD 3D SCANNER PRODUCT MANUAL...
Page 3: ......