Page
7
of
110
SAM-Q-SDI Installation
The SAM-Q range has been designed to be quick and easy to install, requiring minimal installation effort.
Input and output connectivity for the SAM-Q-SDI can be seen below:
SAM-Q-SDI
Product
Inputs
Outputs
Other
SAM-Q-SDI
2 x 3G/HD/SD-SDI*
1 x AES-3id (75 ohm)
2 x Analogue Inputs
(Balanced)
1 x 3G/HD/SD-SDI (re-clocked)
2 x Analogue Outputs
(Balanced)
1 x Headphone Output
1 x HDMI Monitoring Output
1 x 100 Mbps Ethernet
Port (Management,
Control and Loudness
Data**)
1 x USB Port (Software
Updates and
Configuration)
1 x IEC Power Inlet
*
SDI Inputs can also be configured to receive MADI streams when the optional SAM-Q-MADI-LIC license is
installed (see page 74 for more information)
** Loudness data produced by the SAM-Q-SDI may be monitored over an Ethernet network when the
optional SAM-Q-LOUD-LIC license is installed (see pages 79, 82, 83 and 84)
