Page 3 of 6
Brazil Version of COPA
Ⅲ
Ⅲ﹒
Initiation
In general, press and hold the key switches of
【
K2
】
and
【
K3
】
. Then open the
switch of power supply. Discharging these two switches as on operating. After these
three steps, you must input the serial number of chip- sticker that has six degrees. The
locations of
Brazil
「
」
and
France
「
」
of digit-display will represent these six
numbers. If you enter the right numbers, you will hear alarm and all the figure-display
will reveal 8.
◎
Remarks :
1.The keystroke always appears its meanings.
Figure
Country
Picture
Figure
Country
Picture
0
Brazil
1
France
2
Italy
3
Germany
4
Holland
5
Denmark
6
Argentina
7
Croatia
8
Refund
9
Left-Shift
2. If you key in the numbers that is not the same with the chip sticker, the machine
will appear
[95]
while you reopen the power.
3. In order to protect your rights, please ensure that you enter the correct serial
number of chip. The most important point is that you must remember the chip
number, or you won’t do the initiation of IC board when the appearance of
sticker is bad.
Ⅳ﹒
LED and Digit-display Testing
Please press and hold the key switch of
【
K3
】
. Then turn on the power supply.
Releasing the switch as on operating.
Ⅴ﹒
Dipswitch Testing
Please press and hold the key switch of
【
K4
】
. Releasing the switch as on operating.
