TSI Incorporated
– Visit our website
for more information.
USA
Tel:
+1 800 874 2811
UK
Tel:
+44 149 4 459200
France
Tel:
+33 1 41 19 21 99
Germany
Tel:
+49 241 523030
India
Tel:
+91 80 67877200
China
Tel:
+86 10 8219 7688
Singapore
Tel:
+65 6595 6388
P/N 6008574 Rev. B
©2016 TSI Incorporated
Printed in U.S.A.
Installing the Power Supply
(854034)
W A R N I N G
The 854030 Enclosure has been designed
to be used with TSI supplied Power
Supplies Only.
DO NOT
use any
substitutions.
C a u t i o n
Prior to installing/removing the 854034
Power Supply ensure all external power
going into the 854030 is turned off and
the external supply cable is disconnected
from the external connector on the
854030 Enclosure.
1.
Remove the KEP-Nut from the standoff (qty: 2) and
install the DIN Rail Mount and DIN Rail.
2.
Install Power Supply into Mounting Bracket.
3.
Install power supply and mounting bracket onto DIN
Rail by hanging bracket by the top clip and pushing
the bottom of the bracket down into place.
4.
Attached Power Cord.to Power Supply.
5.
Plug Power Supply into Lower DIN Rail.
Power Supply Specifications
Output Voltage .....
24 VDC
Rated Current .......
5A
Rated Power .........
120 W (max)
W A R N I N G
DO NOT
hot-plug the Power Supply into
the DIN Rail. Always connect the 854034
Power Supply first and then turn on any
components located in the 854030
Enclosure.
W A R N I N G
The 854034 Power Supply is not weather
proof and should
NOT
be subjected to
outside precipitation or other adverse
outside weather conditions.