TSI Instruments DustTrak 8535, Operation And Maintenance Manual

Page: 36 / 70

26 Chapter 2
C A U T I O N
DO NOT place the Environmental Enclosure in direct
contact with the ground. The bottom of the
Environmental Enclosure contains an exhaust port
that may allow water to enter the enclosure, resulting
in damage to the DustTrak
™ II and DRX
aerosol monitors.
Transporting the Environmental Enclosure
When transporting the Environmental Enclosure it is important to
store its components correctly. To ensure that no damage is done to
the enclosure or its components during transportation, the following
steps should be taken:
A T T E N T I O N
The Environmental Enclosure is designed to protect
equipment during stationary sampling only.
DO NOT transport or ship equipment inside the
Environmental Enclosure.
1. Unscrew the aerosol inlet from the top of the case.
2. Insert the Inlet Transport Plug into the opening in the inlet ring in
the top of the box.
3. Empty any water from the water trap.
4. Remove temperature/relative humidity probe for heated inlet
accessory if attached.
5. Remove wireless router antenna if attached.
6. Remove DustTrak
™
II/DRX aerosol monitor and battery pack.
7. If mounted on a tripod, take the enclosure off the tripod and screw
in the tripod mount plug.