buyTSI.com - 800.223.4540
PREPARATION - HORIZONTAL DISCHARGE
NOTE: Loosening all T-handle bolts on the
discharge assembly is recommended for
making final adjustments.
PREPARATION - VERTICAL DISCHARGE
Physically pull up
on the assembly
to verify the
strength of your
connections. If
any weakness
or instability is
observed re-secure
and repeat until
the assembly is
securely in place.
This step is best
performed with the
cooperation of two
personnel. Standing at
opposing ends of the
adjusting rods. Pick up the
discharge assembly using
proper lifting techniques
and position the assembly
directly over the wheel
so that the manifold
discharge barrel is at 12
o'clock.
Hook the manifold
discharge barrel rim rests
on the rim. Secure the
adjusting barrels rim rest
at the 6 o'clock position on
the wheel rim and tighten
the T-handle bolts enough
to avoid slippage.
Carefully rotate the
assembly so that the
manifold discharge
barrel is at the 9 o'clock
position on the wheel
rim. Some T-handle bolt
loosening may be required
especially in the event of
a rim that is not perfectly
round. Securely tighten
all T-handle bolts once
the assembly has been
rotated. Physically pull
up on the assembly to
verify the strength of
your connections. If any
weakness or instability
is observed resecure and
repeat until the assembly is
securely in place.
