P/N 6004280 Rev F
Copyright 2018 TSI Incorporated
TSI Model 7110 Quick Guide
Qty
Item
Description
Part/
Model
Reference Picture
1
AeroTrak
®
Airborne
Particle
Counter
7110
1
Barbed Inlet
Fitting
(installed)
700107
1
Power
Supply
24 VDC
3.0A
(U.S. Cord
included)
700230
1
Country-
Specific
Power Cord
700057
(US)
700058
(UK)
700059
(Euro)
3
Clamp-on
electrical
filters for
alarm and
RS-485
cables
1313058
1
Operation
Manual
(6004279)
installed on
CD
6002236
1
Calibration
Certificate
N/A
3. Additional items may be included if you ordered
accessories or spare parts.
Power/Vacuum
4.
CAUTION -
Before connecting power, make sure
that you are operating in a clean room or that the
inlet on top has a HEPA filter attached (especially in
an environment that is not a clean room) and that
clean air is flowing through the instrument. This will
prevent contaminating the optics that will then
require cleaning.
Note
: For zero checking in a dirty
environment, two filters in series may be needed.
5. Connect a vacuum source to the fitting on the back
panel (see below). Make sure the tubing used is
rated for vacuum use (thick-walled).
6. Connect the appropriate power cord to the universal
power supply and the connector from the power
supply to the instrument. Plug the power cord into an
AC supply. The power LED should illuminate on the
front panel.
RS232/
RS485 In
Alarm/
Laser level
Power In
Pulse Out
Vacuum
RS-485 Out
Ethernet
Front Panel LED Indicators
Indicator
Status
Function
Power
Off
Device is not powered
Green
Power is present and device
is functioning normally
Flow
Green
Flow is within specification
(±10% of 28.3 L/min)
Green blinking
Device has a flow error
Service
Yellow
Service is required
Off
Device is functioning normally
Counting
Blue
Counting is enabled
Off
Counting is disabled
7. Refer to the manual on CD for instructions on setting
up communications with TSI FMS Software or
custom software/terminal program.
