TSI Instruments AccuBalance 8370, Operation And Service Manual

Page: 43 / 58

35
Chapter 3
Maintenance
The A
CCU
B
ALANCE
is designed for long-term field use. If the
A
CCU
B
ALANCE
is used with reasonable care, it should be able to make
precise measurements over a long time period. Some of the
components can be cleaned periodically. When cleaning the
components, please follow the instructions given below.
Fabric Hood
The hoods can be washed with mild detergent and cold water. When
washing the hood, keep the hood away from objects with sharp
corners or sharp edges. Careless cleaning may cause damage.
If the fabric gets ripped it should be replaced or repaired. Duct tape
can be placed over the rip on both sides of the fabric for temporary
repair.
To replace a damaged fabric or to order a different fabric size, contact
your local TSI distributor. To determine who your local TSI
distributor is, you may call TSI toll-free at 1-800-876-9874.
If you wish to order a new hood fabric, use the following part numbers
shown in Table 4.
Table 4. Hood Fabric Part Numbers
Fabric Hood Size
Part Number
2 ft x 2 ft (610 mm x 610 mm) 800590
2 ft x 4 ft (610 mm x 1220 mm) 800591
1 ft x 4 ft (305 mm x 1220 mm) 800592
3 ft x 3 ft (915 mm x 915 mm) 800593
1 ft x 5 ft (305 mm x 1525 mm) 800594