TSI Incorporated velocicalc 9545 Operation And Service Manual Download Page 2

 

Copyright

©

 

TSI Incorporated / May 2007 / All rights reserved. 

Address 

TSI Incorporated / 500 Cardigan Road / Shoreview, MN  55126 / USA 

Fax No. 

(651) 490-3824 

LIMITATION OF WARRANTY AND LIABILITY 

(effective July 2000)

 

Seller warrants the goods sold hereunder, under normal use and service as described in the 
operator's manual, shall be free from defects in workmanship and material for twenty-four (24) 
months, or the length of time specified in the operator's manual, from the date of shipment to the 
customer. This warranty period is inclusive of any statutory warranty. This limited warranty is 
subject to the following exclusions: 
a. 

Hot-wire or hot-film sensors used with research anemometers, and certain other 
components when indicated in specifications, are warranted for 90 days from the date of 
shipment. 

b. 

Parts repaired or replaced as a result of repair services are warranted to be free from 
defects in workmanship and material, under normal use, for 90 days from the date of 
shipment. 

c. 

Seller does not provide any warranty on finished goods manufactured by others or on any 
fuses, batteries or other consumable materials. Only the original manufacturer's warranty 
applies. 

d. 

Unless specifically authorized in a separate writing by Seller, Seller makes no warranty 
with respect to, and shall have no liability in connection with, goods which are 
incorporated into other products or equipment, or which are modified by any person other 
than Seller.  

The foregoing is IN LIEU OF all other warranties and is subject to the LIMITATIONS stated 
herein. 

NO OTHER EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR 

PARTICULAR PURPOSE OR MERCHANTABILITY IS MADE

TO THE EXTENT PERMITTED BY LAW, THE EXCLUSIVE REMEDY OF THE USER OR 
BUYER, AND THE LIMIT OF SELLER'S LIABILITY FOR ANY AND ALL LOSSES, 
INJURIES, OR DAMAGES CONCERNING THE GOODS (INCLUDING CLAIMS BASED 
ON CONTRACT, NEGLIGENCE, TORT, STRICT LIABILITY OR OTHERWISE) SHALL 
BE THE RETURN OF GOODS TO SELLER AND THE REFUND OF THE PURCHASE 
PRICE, OR, AT THE OPTION OF SELLER, THE REPAIR OR REPLACEMENT OF THE 
GOODS. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY SPECIAL, 
CONSEQUENTIAL OR INCIDENTAL DAMAGES. SELLER SHALL NOT BE 
RESPONSIBLE FOR INSTALLATION, DISMANTLING OR REINSTALLATION COSTS 
OR CHARGES. No Action, regardless of form, may be brought against Seller more than 12 
months after a cause of action has accrued. The goods returned under warranty to Seller's 
factory shall be at Buyer's risk of loss, and will be returned, if at all, at Seller's risk of loss. 
Buyer and all users are deemed to have accepted this LIMITATION OF WARRANTY AND 
LIABILITY, which contains the complete and exclusive limited warranty of Seller. This 
LIMITATION OF WARRANTY AND LIABILITY may not be amended, modified or its terms 
waived, except by writing signed by an Officer of Seller. 

Service Policy 

Knowing that inoperative or defective instruments are as detrimental to TSI as they are to our 
customers, our service policy is designed to give prompt attention to any problems. If any 
malfunction is discovered, please contact your nearest sales office or representative, or call 
Customer Service department at (800) 874-2811 (USA) or (1) 651-490-2811 (International). 

 

Summary of Contents for velocicalc 9545




















Reviews: