TSI Incorporated DUSTTRAK DRX 8533, Operation And Service Manual

Page: 22 / 85

Chapter 2 12
Figure 2-2: Batteries into Handheld Unit
Connecting the External Pump to DustTrak Model 8533EP
The Model 8533EP is a Desktop DustTrak monitor with an external pump.
This DustTrak monitor has no internal pump and will not work with any other
external pump other than the one provided by TSI (p/n 801675). The Model
8533EP is intended for applications where the DustTrak monitor is operated
continuously over extended periods (several days to months) under wide
temperature fluctuations (0 to 50°C). The external pump is designed to be
more robust for 24/7 operation of the DustTrak monitor and is warranted to
operate continuously for one full year or 8760 hours. The Model 8533EP is
ideal for fugitive dust monitoring.
The pump and the DustTrak monitor come separately and require assembly.
Follow the steps below to connect the pump with the Model 8533EP DustTrak
monitor.
W A R N I N G
Turn the DustTrak monitor OFF before connecting the
external pump. Turn the DustTrak monitor ON only after
connecting the External Module.
1. Connect the pump end of the quick connect to the pump module (see
Figure 2-3).
Figure 2-3: Connect Pump End of Quick Connect to Pump Module