Getting Started
2-3
P r o v i d i n g P o w e r
The Model 9306 may be powered using a rechargeable lithium-ion
battery, or through an AC power cord.
Notes:
•
When using AC power, the battery (if installed) charges when
the instrument is on, but not while actively sampling.
•
Removing/changing the lithium-ion battery or disconnecting
AC power does not cause loss of data.
To Install the Lithium-Ion Battery
1.
Remove the battery cover from the back of the instrument by
lightly depressing the textured tab on the cover located on the
lower left.
2.
Place the lithium-ion battery into the battery compartment
and slide it forward (toward the top of the unit) until it locks
into place.
3.
Replace the battery cover and slide it in place until you hear
a click.
!
W A R N I N G
The battery supplied by TSI (PN 700032) has built in protection against
explosion and fire hazard. Do
not
use a substitute.
!
W A R N I N G
Do
not
use non-rechargeable batteries in this instrument. Fire,
explosions, injury or other hazards may result.
netzerotools.com
netzerotools.com
Summary of Contents for aerotrak 9306-04
Page 2: ...ii netzerotools com netzerotools com ...
Page 6: ...netzerotools com netzerotools com ...
Page 54: ...3 30 AEROTRAK Handheld Airborne Particle Counter netzerotools com netzerotools com ...
Page 57: ...Operation 3 33 netzerotools com netzerotools com ...
