8
PhenoMaster | Hardware Operating Instructions
2.
Instructions for safe Operation
2.1. Notes for the Operator
This system has been manufactured in accordance with the latest technological developments and is
operationally safe. However, it may nevertheless represent a potential hazard, particularly if it is
operated by not suitably trained personnel, or if it is improperly used for other than its intended
purpose.
•
The operator must prepare written instructions for the operation of system in a reasonable
form, based on the safety and operating instructions, the safety data sheets, and the
applicable technical guidelines.
•
These written instructions must be announced in the language of the operating personnel.
•
In order to operate the system in a laboratory, the operator must carry out a risk assessment
and determine the specific risks arising from the typical setup at the location and the operator-
specific operation of the system. The users must be informed of this and appropriately trained.
Risk assessment is a method for evaluating the health and safety hazards for employees at
their workplaces.
•
Use these operating instructions to familiarize the service and cleaning personnel with the
functions, operation, and maintenance of the system.
•
The national rules and regulations concerning the operation and handling of this system must
always be observed.
•
The contents of the operating instructions are subject to change without further notice.
•
These instructions, or parts of these instructions, should only be translated into other
languages by a qualified technical translator. TSE Systems should be informed about this in
advance. TSE Systems cannot be made responsible for a faulty translation. Liability claims
resulting from a faulty translation are to be made against those responsible for the faulty
translation.
•
Save all instructions. Keep these operating instructions close to the system so that safety
instructions and important information are always accessible.
•
If the product is passed on to a third party, then the operating instructions must also be
passed on.
Should you encounter problems concerning components of TSE Systems, please contact
for your own safety. For contact data, please see last page.
2.2. Warranty
TSE Systems warrant the operational safety and the operability of the system only under the
condition that…
•
…the system is operated exclusively in accordance with its intended purpose - taking
particular notice of the safety information - and as described in these operating instructions
and is properly serviced and maintained;
•
…the system isn´t modified by the operator.
•
…original spare parts and accessories that have been approved by TSE Systems are used
only. If you have questions or need assistance, please contact
•
…inspections and maintenance work are performed at the specified intervals.
The warranty is valid from the date of delivery of the system to the operator.
