TSE DPT60, Owner'S Manual

Page: 94 / 459

Instrument Panels
BL90236,0000003 -19-19MAR14-1/1
Instrument Panel
John Deere PowerTech™ OEM engines have an electronic
control system, which has controls and gauges as shown.
The following information applies only to those controls
and gauges supplied by John Deere. Refer to your
engine application manual for specific guidelines if John
Deere-sourced controls and instrumentation are not used.
The following is a brief description of the available optional
electronic controls and gauges found on John Deere
provided instrument panels. Refer to manufacturer’s
literature for information on controls not provided by John
Deere.
Instrument Panel
A — Diagnostic Gauge
The diagnostic gauge (A) allows the operator to view fuel
level, DEF level, engine parameters, diagnostic trouble
codes (DTCs), and other engine functions. The gauge is
linked to the electronic control system and its sensors.
This allows the operator to monitor engine functions and
to troubleshoot the engine systems when needed.
B — Arrow Keys
The arrow keys (B) allows the operator to select menu
items
C — Menu Key
The menu key (C) allow the operator to access the main
menu of the diagnostic gauge.
D — Select Key
The select key (D) allows the operator to access menu
items selected by the arrow keys (B) and confirm changes
made by the operator.
E — Exit Key
The exit key (E) allows the operator to cancel an option
and to go back to the previous menu.
F — Key Start Switch
A
B
C
D
E F
G
H
RG23644
—UN—27AUG13
Instrument Panel
A—Diagnostic Gauge
B—Arrow Keys
C—Menu Key
D—Select Key E—Exit Key
F— Key Switch
G—Cover
H—Speed Select Rocker
Switch
The three-position key start switch (F) controls the engine
electrical system. When the key switch is turned clockwise
to “START”, the engine will crank. When the engine starts,
the key is released and returns to the “ON” (RUN) position.
G — Cover
The cover (G) hides an expansion slot for an additional
switch.
H — Speed Select Rocker Switch
The speed select switch (H) is used to bump engine speed
up (+) or down (-) in small increments during operation.
PowerTech is a trademark of Deere & Company
15-1 032015
PN=47