44
PhenoMaster | Hardware Operating Instructions
Fig. 18 Calorimetry Master Control Unit
Technical Data
Control Unit for 8 Measuring Places:
Dimensions
Approx. 470 x 150 x 515mm (18.5 x 5.91 x 20.28inch) (W x H x D)
Weight
Approx. 15kg
Electric supply
According to the name plate
Connections Calorimetry Process Control Unit
11.2.1.
System configuration
This section describes the connections of a Calorimetry Control Unit of a CaloSys module working
with push principle - to be operated with manual calibration (see Section 11.1.1.1). For instructions
about connections of a Calorimetry Control Unit of CaloSys modules working with push principle - to
be operated with automatic or manual calibration, see Section 11.1.1.2. For instructions about
connections of a Calorimetry Control Unit of CaloSys modules working with pull principle, see Section
11.1.2.
Fig. 19 Calorimetry Master Control Unit - Rear view
1
CO2 zero-point reset button
NOTICE
- Instrument damage! Measurement errors!
Pressing the CO2 zero-point reset button can cause sensor damage and measuring errors.
Do NOT operate red CO2 zero-point reset button on rear panel of Calorimetry Control Unit without
prior consulting
1
