JC series dual counting scale user’s guide
- 16 -
SECTION7 PARAMETERS
The parameters are split into 2 sections, one for the managers and the other one for
Technical.
7.1 USER PARAMETERS
Enter the User Parameters section by pressing the
Pst
key during the self-test when
the power is turned on. This will allow the user to set the way he wants the scale to
work by choosing specific values from some options.
Press the
Smpl
key to scroll through the other parameters. To enter any parameter,
press the
Tare
key.
Press
Smpl
to scroll through the sub-parameters. To see the earlier setting, press the
Tare
key. To change and scroll through the other available settings, press
Smpl
. To
choose the desired setting and thereby go back to the sub-parameter, press the
Tare
key.
To return to the parameter, press the
Zero
key.
7.2 PARAMETER SETTING TABLE
PARAMETER
SUB-
PARAMETER
DISPLAYS AND SETTINGS
“
bEEP
" "
oFF
"
Beeper is set to off
“
bEEP
" "
on I n
"
Beeper is set to on between
limits
bEEP
“
bEEP
” "
on oUt
”
Beeper is set to on outside
limits (when weight less than
min capacity, checkweighing
function will not available
“
LitE
" “"
oFF
"
Backlight is set to off
“
LitE
" "
on
"
Set to on at all times
EL
“
LitE
" "
AUt
"
Set to work automatically when
a weight is placed on the scale
or a key is pressed.
“
UnI t
” ”
KG Lb
” Kg/Lb both are enabled
”
UnI t
” “
KiLo
”
Kg only is enabled
Un I t
”
UnI t
” “
Lb
”
Lb only is enabled
F1 oFF
of
/ / /
/
0 3 5 15 30
Set auto power off time.
0/3/5/15/30 minutes
F2 Prt
P Mo dE
Au oFF Prints only when the
Auto-Accumulation is set to off.
Au on Prints only when the
Auto-Accumulation is set to on.
Summary of Contents for JC 15
Page 1: ...UGJC E1 00 JC series Dual counting Scales User s guide ...
Page 2: ......
Page 3: ...JC series dual counting scale user s guide i ...
Page 6: ......
