manualshive.com logo in svg

TSC TTP-244 Plus, User Manual

Share
Download
TSC TTP-244 Plus User Manual Download Page 22

          

* Recommended SD card specification. 

SD card spec 

SD card capacity

Approved SD card manufacturer 

V1.0, V1.1 

128 MB 

SanDisk, Transcend 

V1.0, V1.1 

256 MB 

SanDisk, Transcend, Panasonic 

V1.0, V1.1 

512 MB 

SanDisk, Transcend, Panasonic 

V1.0, V1.1 

1 GB 

SanDisk, Transcend, Panasonic 

V2.0 SDHC CLASS 4  4 GB  

 

V2.0 SDHC CLASS 6  4 GB  

SanDisk, Transcend, Panasonic 

V1.0, V1.1 

microSD 128 MB  Transcend, Panasonic 

V1.0, V1.1 

microSD 256 MB  Transcend, Panasonic 

V1.0, V1.1 

microSD 512 MB  Panasonic 

V1.0, V1.1 

microSD 1 GB 

Transcend, Panasonic 

V2.0 SDHC CLASS 4  microSD 4 GB  

Panasonic 

V2.0 SDHC CLASS 6  microSD 4 GB  

Transcend 

V1.0, V1.1 

miniSD 128 MB 

Transcend, Panasonic 

V1.0, V1.1 

miniSD 256 MB 

Transcend, Panasonic 

V1.0, V1.1 

miniSD 512 MB 

Transcend, Panasonic 

V1.0, V1.1 

miniSD 1 GB 

Transcend, Panasonic 

V2.0 SDHC CLASS 4  miniSD 4 GB  

Transcend 

V2.0 SDHC CLASS 6  miniSD 4 GB  

 

- The DOS FAT file system is supported for the SD card.

 

- Folders/files stored in the SD card should be in the 8.3 filename format

 

- The miniSD/microSD card to SD card slot adapter is required.

 

 

 

 

 

20

Summary of Contents for TTP-244 Plus






























Reviews:

No comments

Brands by name

Popular brands

Load more brands