TSC TDP-245 Plus, Service Manual

Page: 14 / 60

11
Force Gap Sensor
Calibration
1. Turn off the power switch.
2. Hold on the button then turn on the power switch.
3. Release the button when LED turns red/amber after 5
green/amber blinks. (Any red/amber will do during the 5
blinks).

The LED color will be changed as following:
Amber

red (5 blinks)

amber (5 blinks)

green (5
blinks)

green/amber (5 blinks)

red/amber (5
blinks)

solid green
Skip AUTO.BAS 1. Turn off printer power.
2. Press the FEED button and then turn on power.
3. Release the FEED button when LED becomes solid green.

The LED color will be changed as following:
Amber

red (5 blinks)

amber (5 blinks)

green (5
blinks)

green/amber (5 blinks)

red/amber (5
blinks)

solid green
4. Printer will be interrupted to run the AUTO.BAS program.