13
TDP-245 Model
TDP-245 Plus/TDP-247/TDP-345 Model
7.
Plug in the Cutter Driver IC at U14(TDP-245) /
U30(TDP-245 Plus/TDP-247/TDP-345) socket on
the main board.
8.
Hold the lower cover and lift up the lower inner
cover.
9.
Arrange the cutter module harness through the
bezel.
10.
Connect the cutter module harness to the 4-pin
socket on printer PCB.
11.
Reassemble lower inner cover back to lower cover.
12.
Install cutter module into the niche of the printer.
13.
Close the top cover.
Summary of Contents for PRINTRONIX TDP-244
Page 34: ...30 9 Revise History Date Content Editor...
Page 35: ......
