TSC Printronix MB240 Series, User Manual

Page: 35 / 80

30
Wrinkle happens from label lower right to upper left direction

Make sure the Print head Pressure Adjustment
Knob is in correct position for the current media. Ex: 1~2”, 3~4”

Turn the screw clockwise per level and print to see if the winkle has gone.
 If the ribbon tension adjustment knob has positioned on the level of innermost side but dosnt’t improve the ribbon wrinkle,
please switch the print head pressure at 1 level and print the label again to check if the wrinkle is gone.
 If the wrinkle can’t be avoided, please contact the Customer Service Department of your purchased reseller or distributor for
service.
Feed Direction