11
Caution
•
Before you move the printer to another location within the same building, disconnect the power cord
and make sure that all other cables are disconnected. Moving the printer without doing so could
damage the power cord or the cables and cause a fire or electric shock.
•
Be sure to lift the printer with 2 people, grasping the handles
located on the base from both sides, in a firm embrace. Lifting the
printer in an abnormal fashion or by a single person can result in
injury by dropping it.
•
Always hold the printer level and carry it slowly. If ink is spilled inside
the printer while moving it, this could cause a fire or serious electric
shock or damage the printer.
•
Before moving or shipping the printer, be sure to execute [Moving
the Printer] or [Shipping the Printer] from the printer driver. Also when shipping the printer, set the
protectors. Moving or shipping the printer without taking necessary measures could cause ink leak
inside the printer, resulting in a fire, electric shock, or printer failure.
•
To prevent machine failures, do not relocate or transport this printer with the upper unit open.
Maintenance and Inspections
Warning
•
To avoid a fire hazard, occasionally disconnect the power cord from the printer and the power supply
and use a soft dry cloth to clean the cord connectors and the connection points. Leaving the cord
plugged in and not cleaned for a long period, especially in an area subject to dust, oil, and high
humidity, could cause the insulation material to deteriorate.
•
When cleaning the printer, do not use a flammable solvent (alcohol, thinner, etc.). If a flammable
solvent is brought into contact with the parts inside the printer, a fire or electric shock could result.
•
Check the power cord and power plug regularly. If the following conditions occur, contact your place of
purchase, as the condition may cause a fire:
-
There are burn marks on the power plug.
-
The blade on the power plug is deformed or broken.
Summary of Contents for CPX4D Series
Page 2: ......
