30
5.
After clicking
Set
button, it'll pop-up the window tip
as below shown.
6.
IP address will be shown in the
“IP address” field
and the Wi-Fi logo and IP address will be displayed
on the LCD control panel as shown below. The Wi-
Fi module has been connected.
Note:
IP address should be shown within about 5~15
seconds after printer turn on. If not, please refer to
steps below to initialize the printer Wi-Fi module
settings then to setup it again.
7.
Remove the Type C cable between the computer
and the printer.
8.
Go to main page, click
Add Printer
to add the
printer via
Network
.
9.
Select the printer and enter the setting page by
double clicking the printer.
10.
Click the
Print Test Page
button to print the test
page via Wi-Fi interface.
Summary of Contents for Alpha-30R
Page 1: ...Alpha 30R Moblie Barcode Printers User Manual Series Lists Alpha 30R Direct Thermal ...
Page 51: ...49 ...
Page 52: ...50 8 Revise History Date Content Editor ...
Page 53: ......