4.1.3 Printer Initialization
Printer initialization clears all downloaded files resident in the flash memory and
sets printer parameters to default values.
Parameter Default
Value
MILEAGE Automatic
FLASH TIMES
Automatic
CHECK SUM
Automatic
SERIAL PORT
96,N,8,1
CODE PAGE
437 (8 bit), USA (7 bit)
COUNTRY CODE
001
SPEED
2.0”/sec (1.5"/sec, 342M)
DENSITY 8
SIZE 4"x2.5"
GAP(BLINE) 3
mm
TRANSPARANCY
Will be reset. Need to re-
calibrate the gap sensor
LCD Language
English
Please follow the steps below to initialize the printer:
1. Turn off the printer power.
2. Hold down the
PAUSE
and
FEED
buttons and turn on the printer power.
3. Do not release the buttons until the three LEDs flash in turn.
Note:
Printing method (thermal transfer or thermal direct printing ) will be set
automatically at the activation of printer power.
Download files will be deleted after printer initialization.
Sensor calibration is required after printer initialization before printing
labels.
22
