socket. Ensure that the internal area of the oven is clean and dry.
Internal walls
The internal walls of the oven are metal painted, remove splashes and splatters, as well as any
condensation moisture, with a soft cloth Food splatters can be removed with a paper napkin or with
a damp cloth. Remove grease stains with a cloth dampened with soap, then rinse and dry. Do not use
any abrasive materials as this may scratch or damage the paint. Never pour water in to the oven or
any other liquid that is likely to cause damage, in particular to the drive motor for the glass plate.
Door
Splatters on the internal side of the door, as well as on the door joints and the surrounding area
should be cleaned daily with warm soapy water, then rinsed and dried carefully. It is recommended
that the metal parts of the door are maintained with a damp cloth. Do not use a brush, a scouring
pad or an abrasive cloth. In the event of damage to the door joints or surrounding area, the oven
must not be operated until it has been repaired by an authorised after-sales service technician
approved by the manufacturer.
External surface
The external surface of the oven is metal painted. Clean this area with a cloth dampened with warm
soapy water, then rinse and dry with a soft cloth. Do not allow water into the ventilation inlets on the
sides and to the rear of the oven.
In the event of a breakdown.
If the internal light is not operating, ensure that:
1. the power outlet is properly driven and supplied by the line current (condition of fuse),
2. the door of your microwave oven is properly closed,
3. the timer has been adjusted,
4. the oven has not over-heated and in thermal shutdown due to the automatic oven cut-off protection,
in this event, wait for it to cool down before operating the oven again.
If the internal light is operating, but the oven isn
’
t ensure that:
1. the power selector has been properly adjusted,
2. the plate is rotating normally.
