15
program. When Timer is activated the Recorder
starts recording data onto memory card marked by
a frame (at the timer’s start time).
Starting the Recording by external control
signal
When external control signal appears (contact
“remote” of “VD” connector) the Recorder switches
to record mode. The data will be recorded onto
the memory card marked by a frame (at the time
the signal appears). If VAS or motion detector are
active, the recording starts only after they have
been activated (one or another).
Starting the Recording by motion detector
activation
Adjust the parameters and turn on motion
detector using Recorder’s Menu (see Appendix
1) or “Manager” program. When motion detector
is activated (that means the detector “detects”
motion in the active zone of the vision field of video
sensor) the Recorder switches to Record Mode if
“Rec-Stop” Switch is in “Rec” position or one of
the timers or control signal at “VD” input from the
external device has been activated.
