4
Operating the Recorder
Record Start
To start or stop recording keep the Record button
pressed for about 2 seconds until the LED flashes
five times and starts recording. When the recording
stops the LED flashes once. While recording
the LED flashes from time to time, the number of
flashes indicating battery charge and free memory
capacity. The internal memory of the recorder
is sufficient to cover 99% of the applications, so
to achieve best recording quality and more solid
reliability it is recommended to use default settings:
record mode without compression, sampling rate
20 kHz, VAS and AGC off. All the necessary post-
processing of records (AGC, VAS) can be fulfilled
using the «SoundProcessor» program.
Record Playback
Connect USB cable to the Recorder, then to the
USB port of the PC. The system recognizes a new
storage device. Launch «RecManager.exe» from it.
The content of the Recorder is on the left side of the
window. Select the recording, right-click and select
“Copy to PC”. The recording will be converted to
WAV and appears at the right side of the window. To
