4
Recorder’s Functional Testing
Installing the Battery
To install batteries unscrew the round lid with a
special device which is on the delivery set. Insert
the battery into the case (carefully observe the
polarity – the positive battery contact is to be
upward). Screw the lid.
Install the battery observing the polarity. Otherwise
the recorder may malfunction. Starting the
Recorder. Install the battery into the Recorder.
After the battery has been installed the Recorder
carries out automatic self-testing signifying it
by three flashes of LED. After a while there will
be another flash, its duration depending on the
Recorder’s memory.
Starting the Recording.
To start or stop recording switch “Rec-Stop”
switch to “Record” position. When the recorder
starts recording, the LED flashes five times. While
recording, two series of LED flashes show the
battery charge and free memory size (for more
details see Instructions in the internal memory of the
Recorder). To stop recording switch “Rec-Stop” to
“Stop” position. When the recorder stops recording,
the LED flashes once. The duration of the last flash
depends on the recorder’s memory size.
