Attention!
It is necessary to charge the rechargeable battery
fully at least once every three months to keep it in
working condition when you don’t use it for a long
period of time. Otherwise the battery cannot be
covered by the warranty.
Attention!
When the battery is fully discharged, the recorder
does not answer to button activity, but if it is
connected to a computer, the rechargeable battery
will start charging.
Data Exchange
Connect the shipped USB cable to the recorder’s
special connector and to the computer USB port
(see Figure ). The software has a convenient user
interface so you don’t need special skills to connect
the recorder. To switch to the charging mode, press
the any button on the connected recorder until the
blue LED starts flashing. After this, a removable
drive will appear in the computer system. The
instruction and the RecManager program are on
this drive. Run the RecManager program from the
removable drive. After the data exchange is over,
switch the recorder into a charging mode (press
