starts, which activates fast forward and rewind mode. At this point, press
and hold the "+" button to fast-forward, and the "-" button to reverse.
Note - (in this mode, you cannot adjust the volume).
06. Connecting to a computer
After connecting this recording device to the USB interface of your
computer, you can move, copy, delete, playback the files contained in the
recorder directly from your computer.
Set the date and time: connect the pen to the computer using the USB
cable, open the removable disk drive assigned to the recorder, open the
folder named "SetTime", then start the file named "SetTime" to
synchronize the device with the time and date on the computer, click "OK"
after doing so.
07. Voice activation
Activate the voice activation function. Connect the headset to the device
and then turn it on, press and hold the Play/Pause button for 3 seconds
until the red and blue lights come on, then release the button. Once this is
done, press and hold the Play/Pause button again for 3 seconds, the blue
light will start flashing a couple of times, indicating that the voice activation
function has been activated. From the next recording onwards, the device
will record in voice activation mode, recording only when it detects a
sound.
Deactivate the voice activation function: If you want to deactivate the
activation mode, repeat the steps taken to activate the function, but this
time the red light will flash and not the blue light, indicating that the
function has been deactivated. From the next recording onwards, the
device will normally record continuously without voice activation.
