Trynex International SnowEx Precision Pro SP-1675, Owner'S Manual

Page: 5 / 12

5 © TrynEx International 2013 (REV A) F51073A
Operating Instructions
Loading Spreader/Operating the Controller
LOADING SPREADER
MATERIAL WEIGHTS
MATERIAL WEIGHT PER CUBIC FT.
Rock Salt 80-90 lbs.
Calcium Chloride Pellets 75-85 lbs.
Do not overload vehicle. Use the chart below to calculate the weight of spreader and material to comply with Vehicle Weight Ratings.
Empty weight of spreaders:
SP-1675
205 lbs.
SP-1975 405 lbs.
Approximate capacity of spreaders:
SP-1675 6 cubic feet
SP-1975 14 cubic feet
Approximate weight of full spreaders:
With Rock Salt
SP-1675 715 lbs.
SP-1975 1595 lbs.
With Calcium Chloride Pellets
SP-1675 685 lbs.
SP-1975 1525 lbs.
Leave the screen in the hopper when loading to prevent large chunks and large objects from entering the hopper and damaging the spreader.
OPERATING THE CONTROLLER
Spinner Speed
Auger Speed
Vibrator
ON OFF
Power
Turn the Spreader on with the POWER
switch.
Adjust SPINNER and AUGER speeds with
the two knobs. Speed will be displayed
on the screens. Adjust to get your desired
spread width and application rate –
‘Spread Pattern.’
Use the Vibrator to loosen ‘bridged’ mate-
rial and improve flow to the auger with the
VIBRATE switch. The vibrator does not have
to be on continuously.
Turn the spreader off with the POWER
switch when you are done spreading, or
need to pause. The spread pattern will not
change as long as the knobs are left in the
same position.