5
2-2. LED indicator
PWR
:Power LED keep on when the DC input.
SYS:
The system boot time needs 36sec after SYS LED will blinking, it means that the device is
working.
TX/RX LED
: COMA~COMD Transiting/Receiving Indicator.
2-3. Power Input
DC Jack: Power Input DC +10V to +24V. (Please use the 5.5*2.1mm DC JACK).
There are two types power input.
a. Use the plug of power adaptor than plug in the DC jack on the side.
This approach also allows the user to provide additional power to other devices using the
terminal from EU regulation.
b .Wiring terminals on the EU regulation
2-4. RST button
Keeping pushes the RST button over 10-sec when power on, and the SYS and WiFi LEDs will
blinking then TRP-C34R will be back to factory default setting.
3
.
Install TRP-C34R Hardware
STEP1:
Please connect the power source, the PWR LED will on and wait the SYS LED will
blink.
