2-8. RS232 Wiring
The RS-232 supports 8 channels plus Signal Ground and is configured as DTE like a computer.
Signals are single ended and referenced to Ground. To use handshaking, Flow Control must be set
to RTS/CTS during configuration. Refer to the Pin out table for connections.
2-9. USB Cable Wiring
TRP-C08S is true USB 2.0 specification, it also supports USB V1.0, V1.1 standard. It is strongly to
recommend user use the standard A to B type USB 2.0 cable if USB1.0 cable can not work
properly.
3. TRP-C08S Software Installation.
1. Power on your computer and boot to Windows.
2. Put the driver CD in the CD-ROM then select the driver of O.S you want (See figure1)
Fig.1
