GENERAL MAINTENANCE
For the servicing of the machine it is strongly recommended, for safety and quality of
the maintenance, for this to be conducted by authorised professionals from Truyard
authorised dealers who know the machine.
ADJUSTMENT OR REPLACEMENT OF THE CHIPPER BLADES
Disconnect the spark plug to
ensure that the machine will not
receive power whilst you are
working on the flywheel
Open the discharge chute and
place a bar between one of the
flaps of the flywheel and the
frame of the machine as shown.
Ensure that the flywheel doesn’t
rotate when this bar is in place
by pulling the engine cord.
Using a 19mm spanner, loosen
the nut and bolt that connects the
chipper blade to the flywheel.
CAUTION
– THE CHIPPER
BLADE IS SHARP AND CAN
CAUSE INJURY
