Page 7
The following deployments are possible:
1. Deployment in a straight line and deployment on a slope in series (figure 5).
•
The conveyor belts cannot be placed on top of each other.
•
The conveyor belt sits on the ground on the filling-side.
•
At the output side, the conveyor belt sits on a chair, set of pipes or (for example) a container.
•
The conveyor belt is positioned in such a way that the output of the material ends up in the
small hopper (fig.2).
•
The gradient depends on the type of the materials being transported and their weight.
2. Deployment where the conveyor belts are not placed behind each other.
•
The conveyor belts can be deployed and arranged at every angle.
•
The conditions for deployment are the same as in point 1.
IMPORTANT: read all of the information stickers on the machine very carefully
Please refer to the next chapter ‘Entry into use’ for information on linking several conveyor belts.
4. ENTRY INTO USE
When using the conveyor belt for the first time, it might need to be adjusted. (see paragraph 6.4)
Each conveyor belt is supplied with a power cable that enables the user to connect the device to the 230V
mains network.
POWER CABLE
•
3M: the consumption per conveyor belt is 4,6 A.
•
4.5M: the consumption per conveyor belt is 5,0 A.
USER INSTRUCTIONS
