4
UK only
The supply cord for 230V models is fitted with a
plug containing a 13 amp fuse. Should the fuse
require replacement it must be replaced by a 13
amp fuse conforming to BSI1362, and the fuse
cover must be refitted. If the fuse cover is lost the
plug must not be used until the correct
replacement cover is fitted.
IMPORTANT –
if the supply cord is damaged, it
must only be replaced by a suitable cord
available from the manufacturer or an authorised
service agent.
Warning – This appliance must be earthed
2
Preparation for use
•
Loosen handle pivot knobs and adjust handle
to comfortable operation height
•
Tighten knobs to lock handle in place
2.1 Bag Installation instructions
•
Open Valet Wide Area Vacuum lid.
•
Unzip cloth bag and install paper bag inside.
•
Attach both bag openings together onto
vacuum intake housing.
•
Make sure bag is properly deployed inside
machine housing.
•
Completely close zip on cloth bag and close
lid of machine.
2.2 Brush Height adjustment
•
This machine has 5 brush pile adjustment
settings.
•
To raise brush height:
Lift up height
adjustment bar until desired brush height is
attained.
•
To lower brush height:
push down on
height adjustment bar until desired brush
height is attained.
