1
02-19
IMPORTANT
BEFORE USE READ THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE
INTRODUCTION
The following instructions contain important information about
the machine and safety advice for the operator. Equipment must
be operated, serviced and maintained in accordance with the
manufacturer’s instructions. If in doubt contact the supplier of
your machine.
Read all instructions before using the
machine
PRODUCT INFORMATION
These commercial floor treatment machines are designed for
the high speed polishing and burnishing of hard floors in indoor
areas. A passive dust control system is supplied as standard with
each model. This machine is for indoor use only. The machine is
intended for commercial use, for example in hotels, schools,
hospitals, factories, shops, offices, rental businesses and other
than normal housekeeping purposes.
TECHNICAL SPECIFICATIONS
Model
Orbis UHS 1500
(43cm)
Orbis UHS 1500
(50cm)
Product Code
OB431500
OB501500
Voltage AC (~)/ Frequency
V/Hz
230/50
230/50
Motor Power
W
1100
1100
Capacity
litres
1
1
Productivity Rate
m²/h
860
1000
Pad / brush speed
rpm
1500
1500
Pad / brush pressure
g/cm²
5.5
4
Pad / brush diameter
cm
43
50
Sound pressure level
dB(A)
65.7
65.7
Sound pressure level (with vacuum)
dB(A)
69
69
Dimensions (L x W x H) with handle
cm
65 x 47 x 125
72 x 55 x 125
Weight
kg
34
34.5
Cable length
m
15
15
Warranty
2 years subject to conditions
Handle vibration does not exceed 2.5 m/s² when operating on a smooth hard surface.
Noise levels measured at a distance of 1 metre from machine and 1.6 metres above floor, when washing a hard floor. Measurements
recorded using a hand held meter.
Above dimensions are approx. Since the company’s policy is to continuously improve the product, there could be changes without
prior notice.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(WEEE)
Do not dispose of this device with unsorted waste.
Improper disposal may be harmful to the
environment and human health. Please refer to
your local waste authority for information on
return and collection systems in your area.
IMPORTANT SAFETY ADVICE
The safety information described in this manual provides basic
precautions and supplements standards in force in the country
where the machine is used.
This symbol warns the operator of hazards and unsafe
practices which could result in severe personal injury
or death.
WARNING – to reduce the risk of injury,
electric shock or fire.
1.
This machine must only be used for the manufacturer’s
approved application as described in this manual.
EC Declaration of Conformity
Machine Type: Rotary Floor Burnishing Machine
Model: OB431500…, OB501500…,
This machine is in conformity with the following EU
directives:
Machinery Directive
2006/42/EC
The EMC Directive
2014/30/EU
Applied harmonised standards:
EN60335-1, EN60335-2-67, EN55014-1, EN55014-2,
EN62233, EN61000-3-2, EN61000-3-3
Truvox International Limited
Unit C (East), Hamilton Business Park,
Manaton Way, Botley Road,
Hedge End, Southampton,
SO30 2JR, UK
Malcolm Eneas
Operations Manager
Southampton, 01/11/2018
Summary of Contents for Orbis OB431500
Page 2: ...3 Diagrams 4...