Truvox HYDROMIST 13, User Manual, Page: 4 / 11

4 June 13
1. Product information
The Hydromist range of carpet soil extraction machines
are designed for the efficient cleaning of carpets and
upholstery. The machine is intended for commercial use,
for example in hotels, schools, hospitals, factories, shops,
offices, rental businesses and other than normal
housekeeping purposes.
The following instructions contain important information
about the machines and safety advice for the operator.
These instructions are valid for the following models:
HM13...,
Equipment must be operated, serviced and maintained in
accordance with the manufacturer’s instructions. If in
doubt contact the supplier of your machine.
1.1 Important safety advice
When
using this machine, basic safety
precautions should be followed, including the
following:
•
This machine must only be used for the manufacturer’s
approved application as described in this manual.
•
Please note that the safety information described in the
manual supplements and does not replace standards in
force in the country in which the machine is used.
•
WARNING - Only use accessories and spare parts
provided with the machine or those approved by the
manufacturer. The use of other spare parts or
accessories may impair the safety of the machine.
•
CAUTION - This machine is for indoor use only and
should not be used or stored outdoors in wet conditions.
•
All parts are to be positioned as indicated in the
instructions before using the machine.
•
The machine must be unpacked and assembled in
accordance with these instructions before connecting to
the electrical supply.
•
DO NOT use where hazardous dust is present.
•
DO NOT use in an explosive atmosphere.
•
DO NOT pick up or use near flammable fluids, dusts or
vapours.
•
DO NOT use to clean up any burning or lighted
materials such as cigarettes, matches, ashes or other
combustible objects.
•
DO NOT use the appliance to vacuum tiny particles like
cement or plaster dust as this will shorten life of the
motors.
•
Take care when using a machine near the top of stairs
to avoid overbalancing.
•
Only use the machine on firm level surfaces. DO NOT
use on a gradient or more than 2% slopes.
•
DO NOT operate this machine on rough uneven
surfaces e.g. industrial concrete floors.
•
DO NOT use on coarse concrete surfaces.
•
DO NOT use outdoors e.g. on patios, decks or rough
surfaces.
•
WARNING – Do not fill machines with water hotter than
50°C.
•
DO NOT use diesel/petrol or corrosive detergents to
wash floors.
•
DO NOT wash and vacuum corrosive, flammable and/
or explosive liquids, even if diluted.
•
DO NOT put any object into openings. DO NOT use
with any opening blocked; keep free of dust, debris and
anything that may reduce airflow.
•
DO NOT block air flow, blocking the suction in any way
(blocked filters, blocked hose) will decrease the
efficiency and will shorten the life of the motor.
•
DO NOT cover machine when in use.
•
DO NOT leave the machine connected to the electricity
supply when not in use; always remove the plug from
the socket outlet.
•
DO NOT leave machine running unattended.
•
Switch off the machine before removing the plug.
•
This machine should always be connected to a fully
earthed power supply of the right voltage and frequency.
•
The machine shall be disconnected from its power
source during its cleaning or maintenance and when
replacing parts or accessories, by removing the plug
from the socket-outlet.
•
DO NOT use if it has been damaged, left outdoors or
dropped into water.
•
DO NOT operate buttons or touch the mains plug with
wet hands as this may cause electric shock.
•
WARNING - Keep the power supply cord clear of
moving parts (and/or rotating brushes). During operation
hazard may occur when running the machine over the
power supply cord.
•
DO NOT operate the machine with a damaged supply
cord or plug, or after the machine malfunctions or is
damaged in any way. Contact an authorised Service
Agent for repair or adjustment.
•
DO NOT pull or carry by the supply cord. DO NOT use
cord as a handle, close door on cord or pull cord around
sharp edges or corners.
•
The plug of the power supply cord must be removed
from the socket-outlet before commencing cleaning of
the machine or undertaking maintenance operations.
•
DO NOT kink or twist the power cord and keep cord
away from heated surfaces.
•
When unplugging, pull the plug, not the supply cord.
•
Never use excessive foaming or highly corrosive
cleaning solutions.
1.2 Guidelines for the operator
•
This machine is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the machine by a
person responsible for their safety.
Please refer to machine pictures on page 1
1
2
3
4 Telescopic handle
Cord wrap
Recovery tank
Latches 5
6
7 Solution tank
Drain plug
Switches